近红外光谱结合共识模型快速检测果酒的总酚含量

果酒发酵中的多酚是引起果酒口感、颜色变化的重要因素。为保证果酒品质,有必要开发一种快速监测发酵过程中多酚含量变化的技术。收集不同批次成熟期的蓝莓、桑葚为原料,分别碾压成汁,同时按比例混合二者,于小型发酵罐进行发酵。通过离线收集不同发酵时段的发酵液于离心管,高速离心后取上清液置于棕色瓶保存,共计得到48个果酒发酵样本。将上清液置于三个平行样比色皿,以傅里叶快速变换近红外光谱仪(FT-NIR)采集其透射光谱,取平均值作为该样本的光谱信号。然后将棕色瓶内的发酵液以国标法(即以标准液的吸光度值制定标准曲线)测定各样品的总酚含量,以duplex法计算样本光谱之间的距离且按2∶1的比例划分为训练集和预测集。采用间隔偏最小二乘法(iPLS)将训练集样本的透射光谱与总酚含量之间构建定量模型,间隔数从2依次变化到60个。该研究创新之处是使用共识方法融合多个已构建好的iPLS成员模型,按一定的共识规则分配权系数。通过各成员模型交互验证的残差及其残差之间的相关性来优化各成员模型的线性组合,以拉格朗日乘数法求解各成员模型的权系数,使间隔偏最小二乘-共识模型(consensual iPLS,CiPLS)的交互验证均方根误差最小。相比于全局PLS模型、划分不同间隔数量时的iPLS模型,CiPLS均具有较小的预测误差。当划分39个间隔时由三个iPLS成员模型(即14th,16th,18th)组成的共识模型误差最小为124.2,交互验证相关系数为0.944,对预测集样本的预测均方根误差为163.4,预测相关系数为0.931,预测性能均优于PLS和iPLS模型。另外,作为对比选用连续投影算法与无信息变量剔除法来优化光谱模型,其预测性能均不及本文提出的共识模型。分析各iPLS模型预测残差之间的相关性,发现共识模型主要是融合那些具有较高预测性能且模型间较低相关性的成员模型。结果表明,光谱分析结合共识方法可提高回归模型的预测精度、减少建模所需变量数,能够用于果酒总酚含量的离线快速检测。     

NO分子宏观气体热力学性质的理论研究

采用量子统计系综理论,研究了基态NO分子宏观气体摩尔熵、摩尔内能、摩尔热容等热力学性质.首先应用课题组前期建立的变分代数法(variational algebraic method, VAM)计算获得了基态NO分子的完全振动能级,得到的VAM振动能级作为振动部分,结合欧拉-麦克劳林渐进展开公式的转动贡献,应用于经典的热力学与统计物理公式中,从而计算得到了1000-5000 K温度范围内NO宏观气体的摩尔内能、摩尔熵和摩尔热容.将不同方法计算得到的摩尔热容结果分别与实验值进行比较,结果表明基于VAM完全振动能级获得的结果优于其他方法获得的理论结果.振动部分采用谐振子模型对无限能级求和计算热力学性质的方法有一定的局限性,应当使用有限的完全振动能级进行统计求和.     

椭球粒子声辐射力计算及分析

针对水下椭球粒子,以声散射理论为基础,采用分波序列的方法,建立了椭球粒子声辐射力的理论计算模型。进而根据声辐射力计算公式,以刚性椭球粒子和液体椭球粒子为例,计算并分析不同Bessel波束作用下椭球粒子的轴向声辐射力函数特征。数值仿真计算结果表明,对于刚性椭球粒子,扁平椭球粒子相对于细长椭球粒子更有助于激发负声辐射力；对于液体椭球粒子,细长椭球粒子相对于扁平椭球粒子更加容易产生负声辐射力；对于不同介质的椭球粒子,不同的入射波束激发的负声辐射力的效果也存在明显的差异。该结果为复杂的尺寸和介质粒子声操控技术提供了理论的可行性。     

On-chip multiphoton Greenberger–Horne–Zeilinger state based on integrated frequency combs

One of the most important multipartite entangled states, Greenberger–Horne–Zeilinger state (GHZ), serves as a fundamental resource for quantum foundation test, quantum communication and quantum computation. To increase the number of entangled particles, significant experimental efforts should been invested due to the complexity of optical setup and the difficulty in maintaining the coherence condition for high-fidelity GHZ state. Here, we propose an ultra-integrated scalable on-chip GHZ state generation scheme based on frequency combs. By designing several microrings pumped by different lasers, multiple partially overlapped quantum frequency combs are generated to supply as the basis for on-chip polarization-encoded GHZ state with each qubit occupying a certain spectral mode. Both even and odd numbers of GHZ states can be engineered with constant small number of integrated components and easily scaled up on the same chip by only adjusting one of the pump wavelengths. In addition, we give the on-chip design of projection measurement for characterizing GHZ states and show the reconfigurability of the state. Our proposal is rather simple and feasible within the existing fabrication technologies and we believe it will boost the development of multiphoton technologies.     

基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

Stochastic sensitivity analysis of coupled acoustic-structural systems under non-stationary random excitations

This paper presents a new sensitivity analysis method for coupled acoustic–structural systems subjected to non-stationary random excitations. The integral of the response power spectrum density (PSD) of the coupled system is taken as the objective function. The thickness of each structural element is used as a design variable. A time-domain algorithm integrating the pseudo excitation method (PEM), direct differentiation method (DDM) and high precision direct (HPD) integration method is proposed for the sensitivity analysis of the objective function with respect to design variables. Firstly, the PEM is adopted to transform the sensitivity analysis under non-stationary random excitations into the sensitivity analysis under pseudo transient excitations. Then, the sensitivity analysis equation of the coupled system under pseudo transient excitations is derived based on the DDM. Moreover, the HPD integration method is used to efficiently solve the sensitivity analysis equation under pseudo transient excitations in a reduced-order modal space. Numerical examples are presented to demonstrate the validity of the proposed method.     

The Applications of Order Reduction Methods in Nonlinear Dynamic Systems

Two different order reduction methods of the deterministic and stochastic systems are discussed in this paper. First, the transient proper orthogonal decomposition (T-POD) method is introduced based on the high-dimensional nonlinear dynamic system. The optimal order reduction conditions of the T-POD method are provided by analyzing the rotor-bearing system with pedestal looseness fault at both ends. The efficiency of the T-POD method is verified via comparing with the results of the original system. Second, the polynomial dimensional decomposition (PDD) method is applied to the 2 DOFs spring system considering the uncertain stiffness to study the amplitude-frequency response. The numerical results obtained by the PDD method agree well with the Monte Carlo simulation (MCS) method. The results of the PDD method can approximate to MCS better with the increasing of the polynomial order. Meanwhile, the Uniform-Legendre polynomials can eliminate perturbation of the PDD method to a certain extent via comparing it with the Gaussian-Hermite polynomials.     

Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.     

A general modal frequency-domain vortex lattice method for aeroelastic analyses

The generalized aerodynamic force (GAF) matrix is derived for the Unsteady Vortex Lattice Method (UVLM) without the assumption of out-of-plane dynamics. As a result, the approach naturally includes in-plane motion and forces unlike the doublet lattice method (DLM). The derived UVLM GAF is therefore applicable to industry-standard techniques for aeroelastic stability analyses, such as the p–k method. In this work, the fluid–structure interpolation is performed with radial basis functions for surface interpolation. The generalized aerodynamic forces computed with the UVLM are verified against the DLM from NASTRAN on a simple flat plate configuration. The ability of the UVLM to include steady loads is verified with a T-tail flutter case and the results confirm the importance of including steady loads for T-tail flutter analysis. The modal frequency domain VLM therefore provides the same level of efficiency and accuracy than the DLM, but without the restrictions and with the ability to handle complex geometries. It is therefore a viable replacement to the DLM.